Results for pocketwizard cm e3 acc
The PocketWizard CM-N3-ACC Remote Cable is for remotely triggering the electronic shutter release of Canon cameras equipped with a N3 Remote Terminal. It is required for remote camera triggering with a FlexTT5 trigger if using E-TTL functions. In addition, the PocketWizard CM-N3-ACC cable contains...
Click For Info
The PocketWizard CM-N3-ACC-1 Remote Cable is for remotely triggering the electronic shutter release of Canon cameras equipped with a N3 Remote Terminal. It is required for remote camera triggering with a FlexTT5 trigger if using E-TTL functions. In addition, the PocketWizard CM-N3-ACC-1 cable...
Click For Info
The Pocket Wizard N-MCDC2-ACC Electronic Remote Cable is designed to connect a PocketWizard MultiMax with ACC port or TT5 trigger to a Nikon DSLR supporting the MD-DC2 type remote release connection eg the D90 or D5000. It should be noted however that battery consumption will increase. MSMM stereo...
Click For Info
The PocketWizard S-RMS1AM-ACC-1 Remote Accessory Cable is a 30cm cable used to connect a PlusX, Plus III, FlexTT5 or MultiMAX with ACC port to a Sony or Minolta remote shutter release terminal and acting as a pre-trigger cable. A Pre-Trigger cable controls both the half-press and full-press...
Click For Info
The PocketWizard CM-E3-ACC-1 Remote Accessory Cable is a 30cm cable for connecting a PlusX, Plus III, FlexTT5 or MultiMAX with ACC port to a Canon E3 remote terminal or sub miniphone (3/32\" or 2.5 mm) and acting as a pre-trigger cable. A Pre-Trigger cable controls both the half-press and...
Click For Info
The PocketWizard CM-E3-ACC Remote Cable is for remotely triggering the electronic shutter release of cameras with a Canon E3 or sub-miniphone (2.5 mm or 3/32 inch, stereo or mono) remote terminal. MSMM stereo to mono miniphone adapter included.
Click For Info
Pre-Trigger Remote Cable fFor connecting a PlusX, Plus III, FlexTT5 or MultiMAX with ACC port to a Sony or Minolta remote shutter release terminal. Cable length: 3\' (91 cm)From 1/8\" (3.5 mm) Stereo MiniphoneTo Sony or Minolta remote shutter release terminalPocketWizard Compatibility:? PlusX? Plus...
Click For Info
The PocketWizard S-RMS1AM-P Electronic Shutter Release Cable allows remote operation of Sony or Minolta cameras that utilise the RMS1AM electronic cable release connection from a PocketWizard Plus III, TT5 or MultiMAX transmitter. Toggle Pre-Trigger on and off remotely with the MultiMAX. Required...
Click For Info
The Pocket Wizard CM-E3-ACC Remote Cable is for remotely triggering the electronic shutter release of cameras with a Canon E3 or sub-miniphone (2.5 mm or 3/32 inch, stereo or mono) remote terminal.
Click For Info
The Pocket Wizard N-MCDC2 Electronic Remote Cable is designed to connect a PocketWizard MultiMax with ACC port or TT5 trigger device to a Nikon camera supporting the MD-DC2 type remote release connection and Pre-Trigger switch eg the D90 or D5000. This cable incorporates the Pre-Release circuitry...
Click For Info
The PocketWizard N10-ACC (previously N90M-ACC-ND) Remote Cable is for remotely triggering the electronic shutter release of Nikon DSLR\'s cameras equipped with a 10 pin Remote Terminal. It is required for remote camera triggering with a MultiMax with ACC port or FlexTT5 trigger (not PlusII), if...
Click For Info
The PocketWizard NM4-ACC Remote Cable is for remotely triggering the electronic shutter release of Nikon DSLR\'s cameras equipped with a 4 pin Remote Terminal (except D70). It is required for remote camera triggering with a MultiMax with ACC port or FlexTT5 trigger (not PlusII), if using TTL...
Click For Info
The PocketWizard N10-ACC-1 Remote Accessory cable is a 30cm cable for connecting a PlusX, Plus III, FlexTT5 or MultiMAX with ACC port to a Nikon 10-Pin Remote Shutter Terminal remote terminal and acting as a pre-trigger cable. A Pre-Trigger cable controls both the half-press and full-press function...
Click For Info
The PocketWizard NMCDC2-ACC-1 Remote Accessory Cable is a 30cm cable for connecting a PlusX, Plus III, FlexTT5 or MultiMAX with ACC port to a Nikon MC-DC2 remote terminal and acting as a pre-trigger cable. A Pre-Trigger cable controls both the half-press and full-press function of your camera\'s...
Click For Info
The PocketWizard MSMM Adapter is used for adapting an -ACC stereo miniphone remote camera cable to a mono miniphone cable. For use with a Plus II or older MultiMAX top port. The adapter features a 1/8\" (3.5 mm) stereo miniphone to 1/8\" (3.5 mm) mono miniphone and is compatible with all Plus II,...
Click For Info
Pre-Trigger Remote Cable for connecting a Plus II or MultiMAX with no ACC port to a Sony or Minolta remote shutter release terminal, through a Pre-Trigger switch. Cable length: 3\' (91.5 cm)From 1/8\" (3.5 mm) Mono MiniphoneVia Pre-Trigger SwitchTo Sony or Minolta remote shutter release terminal...
Click For Info
The PocketWizard PTMM Adapter is a pre-trigger mono miniphone adapter for adapting a -ACC stereo miniphone remote camera cable to a mono miniphone pre-trigger cable. Pre-trigger switches allows you to selectively wake or sleep camera just like using camera\'s shutter release button.
Click For Info
The PocketWizard PW-DC-N10 Power Cable is designed for use with the PocketWizard MiniTT1 Transmitter, the Plus III and MultiMAX (version with USB port) Transceivers and any Nikon Digital Single-Lens Reflex (DSLR) camera equipped with a Nikon 10-pin remote terminal. This cable provides a...
Click For Info
The PocketWizard PlusX Transceiver is the simplest PocketWizard radio ever and the perfect entry into the PocketWizard Wireless System. Whether you are new to off-camera flash or an experienced pro looking to expand upon an existing PocketWizard system the PlusX is the perfect choice. Simply attach...
Click For Info
The PocketWizard PlusX Transceiver is the simplest PocketWizard radio ever and the perfect entry into the PocketWizard Wireless System. Whether you are new to off-camera flash or an experienced pro looking to expand upon an existing PocketWizard system the PlusX is the perfect choice. Simply attach...
Click For Info
Introducing the smallest Pocket Wizard radio trigger ever, the MiniTT1 Transmitter for Nikon locks onto the camera\'s hot shoe supporting an on-camera flash with its own hot shoe while working with remote PocketWizard units. Remotes can be one or more PocketWizard FlexTT5 Transceivers connected to...
Click For Info
The PocketWizard G-Wiz Squared Case provides perfect protection for up to four of the PocketWizard Plus III radio triggers. The movable padded dividers allow you to customise the interior to fit any combination of PocketWizard products including MiniTT1, FlexTT5, Plus II, Plus III or MultiMax, plus...
Click For Info
Introducing the smallest Pocket Wizard radio trigger ever, the MiniTT1 Transmitter for Canon locks onto the camera\'s hot shoe supporting an on-camera flash with its own hot shoe while working with remote PocketWizard units. Remotes can be one or more PocketWizard FlexTT5 Transceivers connected to...
Click For Info
The PocketWizard G-Wiz Squared Case provides perfect protection for up to four of the PocketWizard Plus III radio triggers. The movable padded dividers allow you to customise the interior to fit any combination of PocketWizard products including MiniTT1, FlexTT5, Plus II, Plus III or MultiMax, plus...
Click For Info
The PocketWizard G-Wiz Squared Case provides perfect protection for up to four of the PocketWizard Plus III radio triggers. The movable padded dividers allow you to customise the interior to fit any combination of PocketWizard products including MiniTT1, FlexTT5, Plus II, Plus III or MultiMax, plus...
Click For Info
The PlusX is the simplest PocketWizard radio ever and the perfect entry into the PocketWizard Wireless System. How simple? Attach one PlusX to your camera, another PlusX to a remote flash using an included cable, set both radios to the same channel and start taking pictures. The PlusX is compatible...
Click For Info
The PocketWizard SMFMS Adapter is a reducer adapter, with a 3.5mm stereo miniphone input (female) and a 2.5mm jack (male). It can be used to adapt a PocketWizard miniphone sync cable like the MM1, MM3 or MM6 to electronic flashes equipped with a 2.5mm (3/32\") sub miniphone sync terminal.
Click For Info
Protect your PocketWizards from potential scuffs and knocks with this handy case. It provides padded protection for two FlexTT5\'s and a MiniTT1 or two Plus or MultiMAX PocketWizard Radios. There\'s even room for some batteries, cables or quickguide and there is a cool little PocketWizard carabiner...
Click For Info
The PocketWizard G-Wiz Vault Case is designed for those photographers with multiple PocketWizard radio transceivers. It can carry up to six MultiMAX\'s, Plus II\'s or Plus III\'s, or ten Flex TT1/5\'s. Available in a choice of three colours, black, orange or blue it can also be used to carry a...
Click For Info
The PocketWizard MPCF-L PC to Miniphone Adapter is used to adapt a PC sync cable to a PocketWizard radio unit: A PC terminal to 1/8\" (3.5 mm) mono miniphone. Compatible with long tip, locking, and standard non-locking sync cords. This adapter does have receiving locking threads.
Click For Info
The PocketWizard G-Wiz Vault Case is designed for those photographers with multiple PocketWizard radio transceivers. It can carry up to six MultiMAX\'s, Plus II\'s or Plus III\'s, or ten Flex TT1/5\'s. Available in a choice of three colours, black, orange or blue it can also be used to carry a...
Click For Info
PocketWizard\'s PC1N Mono Miniphone to Locking PC Cable is used to adapt any sync cable to a PocketWizard radio.
Click For Info
The PocketWizard G-Wiz Vault Case is designed for those photographers with multiple PocketWizard radio transceivers. It can carry up to six MultiMAX\'s, Plus II\'s or Plus III\'s, or ten Flex TT1/5\'s. Available in a choice of three colours, black, orange or blue it can also be used to carry a...
Click For Info
The PocketWizard TTL 5-Pack is the ideal start point to expand your lighting control. Consisting of a MiniTT1 transmitter; 2 x FlexTT5 Transceivers; an AC3 ZoneController; and a G-Wiz Uber bag. The MiniTT1 transmitter can be used to trigger remote E-TTL speedlites or studio flashes that have the...
Click For Info
The PocketWizard TTL 5-Pack is the ideal start point to expand your lighting control. Consisting of a MiniTT1 transmitter; 2 x FlexTT5 Transceivers; an AC3 ZoneController; and a G-Wiz Uber bag. The MiniTT1 transmitter can be used to trigger remote E-TTL speedlites or studio flashes that have the...
Click For Info
The blue G-Wiz Vault Gear Bag from PocketWizard holds up to 6 MultiMAX or Plus II radios with connector cables, 10 FlexTT5s, or a full-size DSLR camera body. It features 3 movable or removable hook-n-loop padded dividers, allowing you to customize this bag according to your gear-packing needs....
Click For Info
The black G-Wiz Vault Gear Bag from PocketWizard holds up to 6 MultiMAX or Plus II radios with connector cables, 10 FlexTT5s, or a full-size DSLR camera body. It features 3 movable or removable hook-n-loop padded dividers, allowing you to customize this bag according to your gear-packing needs....
Click For Info
The PocketWizard G-Wiz Squared bag holds up to four Plus III’s and connector cables and features movable hook-n-loop padded dividers allowing photographers to customize this bag to fit their gear-packing needs. The G-Wiz Squared opens from the top allowing photographers to ensure at a glance that...
Click For Info

